B55AC Bendi


“Bendi Rear Wheel Drive High Capacity, High Lift Narrow Aisle Multipurpose Electric Articulating Forklift The Bendi models B55AC and B55AC-HL work in aisles as narrow as *84″” (2.13M). The B55AC high volume model has a basic capacity of 5,500 lbs. (2500kg) at 24″” (600mm) load center and has lift heights available to 30′ (9.14M). The B55AC-HL (High Lift) Model has a basic capacity of 4,500 lbs. (2045kg) and lift heights available to 41’ (12.5M).
Both the B55AC and the B55AC-HL models are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. Both models can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles. ”


Exceptional Design and Engineering

  • B55AC 5,500 lb. (2500kg) Capacity at 24″” (600mm) Load Center
  • B55AC-HL 4,500 lb. (2045kg) Capacity at 24″” (600mm) Load Center
  • Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
  • DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • High Visibility Mast Allows Optimum Safety and Control
  • The B55AC-HL has a Fixed Mast and Tilting Carriage for Reduced Mast Deflection and Load Movement at High Elevations